Your Monthly Kawaii & Cute merch from Japan! - READ MAJOR SHIPPING UPDATES

Sanrio Sewing Kit Instructions

Below, please find the English instructions to your Sanrio Sewing Kit character included in the January 2022 box. 

Happy sewing!


What it contains: Yellow yarn - Brown yarn - Cardboard - Ball chain



Things to prepareScissors - Ruler - Clips - Felt mat or Sponge - Needle - Tweezers - Hand craft bond


Cut the cardboard along the cut-out lines to make four patterns.

Place a ruler on the dotted line and fold it neatly as shown.


1. Make two sets of two patterns, fold the stopper part tightly and unfold it.

2. Cut three pieces of yellow yarn and make knotted threads (1 piece of 30 cm and 2 pieces of 20 cm) and put them aside for later use.

3. Hold two patterns on top of each other so that they do not shift. Pull the end of the yarn 1 cm out of the pattern and press it down with your fingers.

4. Do not pull the yarn too tightly, and wind it so that the thickness is even. When you have finished winding, cut the yarn, leaving 5 cm of yarn.

5. Hook the yarn on your finger as shown in the figure, and pull the end of the yarn from (4) through the yarn.

6. Make another identical one with the remaining pattern and yellow yarn.

7. When you have finished making two, align the stopper parts and secure them with clips.

8. Insert the scissors into the gap between the patterns. Cut the yarn little by little along the center. Be careful not to cut the patterns.

9. When you have finished cutting all the pieces, put the 30 cm of knotting thread (2) into the gap between the patterns and tie it tightly so that it will not come undone.

10. Remove all clips and remove the yarn from the pattern.

11. Wind the yellow yarn around the pattern in the same way as in step (3). After 30 wraps, cut off the ends and follow the same process as in step (5) to prevent unraveling.

12. Make another identical one with the remaining pattern and yellow yarn.

13. Repeat the same process from step (7) to (10) with 20cm knotting threads. Small ear parts are ready.

14. Make another one identical to step (13). All the parts for the face and ears are now complete.

15. While imagining the face of Pom Pom Purin, cut and shape it into an oval of 5.5 cm (width) x 4 cm (height).

16. While imagining the ears of Pom Pom Purin, cut and shape it into a drop-shaped of 2.5 cm (width) x 4 cm (height). Be careful not to cut the knotted thread in the center.

17. Make the other ear in the same way.

18. Place the ears made with (17) on the edge of the face of (15) and stab the joint parts toward the face to fix them.

19. While imagining Pom Pom Purin's face, adjust the whole thing.

20. Cut a piece of brown yarn into 1 cm pieces, stick it in an inverted triangle to harden, and attach it to the nose with a bond.

21. Cut a piece of brown yarn into 0.5cm pieces, roll it up, and paste it on the face. Make and paste the other eye in the same way.

22. Cut the brown thread into 1.2 cm pieces and divide into three. Pinch two of these strands between your fingers and turn and pull to form a string.

23. While checking the balance of the face, attach the strings of (22) symmetrically with a bond, and cut the excess with scissors.

24. Roll the brown yarn flat as shown. When it reaches 3 cm in diameter, cut off the ends.

25. Fix the end of the yarn so that it does not stick out, and stab the whole thing to harden it.

26. Make another one of the same size, stack them on top of each other and stab and harden them to make them 1cm thick.

27. Make 6 pieces of brown yarn into 1cm pieces.

28. Place the ball chain a little back from the center of (26), and attach it by sticking in the three strands of yarn made in (27).

29. Repeat the process of (28) again to reinforce it well.

30. Cut a piece of brown yarn into 6 cm pieces, fold it into three pieces, and stab it to harden it.

31. Put it in the center of the (29), and stab it to harden it. Arrange it so that it looks like a hat.

Final.ly, place the hat on the head and attach it firmly with a bond, keeping an eye on the balance.


That's it, you're done!


What it containsWhite yarn - Blue yarn - Pink yarn - Cardboard - Ball chain



Things to prepareScissors - Ruler - Clips - Felt mat or Sponge - Needle - Tweezers - Hand craft bond


Cut the cardboard along the cut-out lines to make four patterns.

Place a ruler on the dotted line and fold it neatly as shown.


1. Make two sets of two patterns, fold the stopper part tightly and unfold it.

2. Cut three pieces of white yarn and make knotted threads (1 piece of 30 cm and 2 pieces of 20 cm) and put them aside for later use.

3. Hold two patterns on top of each other so that they do not shift. Pull the end of the yarn 1 cm out of the pattern and press it down with your fingers. 

4. Do not pull the yarn too tightly, and wind it so that the thickness is even. 

5. When you have finished winding, cut the yarn, leaving 5 cm of yarn.

6. Hook the yarn on your finger as shown in the figure, and pull the end of the yarn from (5) through the yarn.

7. Make another identical one with the remaining pattern and white yarn.

8. Wen you have finished making two, align the stopper parts and secure them with clips.

9. Insert the scissors into the gap between the patterns. Cut the yarn little by little along the center. Be careful not to cut the patterns.

10. When you have finished cutting all the pieces, put the 30 cm of knotting thread (2) into the gap between the patterns and tie it tightly so that it will not come undone.

11. Thread the knotting thread through the ball chain and tie it tightly.

12. Remove all clips and remove the yarn from the pattern.

13. Wind the white yarn around the pattern in the same way as in step (3).

14. After 40 wraps, cut off the ends and follow the same process as in step (6) to prevent unraveling.

15. Make another identical one with the remaining pattern and white yarn.

16. Repeat the same process from step (8) to (12) with 20cm knotting threads. Small ear parts are ready.

17. Make another one identical to step (16). All the parts for the face and ears are now complete.

18. While imagining the face of Cinnamoroll, cut and shape it into a triangle of 5.5 cm (width) x 3.6 cm (height).

19. While imagining the ears of Cinnamoroll, cut and shape it into a drop-shaped of 3 cm (width) x 4.5 cm (height). Be careful not to cut the knotted thread in the center.

20. Make the other ear in the same way.

21. Place the ears made with (21) on the edge of the face of (18) and stab the joint parts toward the face to fix them.

22. While imagining Cinnamoroll's face, adjust the whole thing.

23. Cut a piece of blue yarn into 2.5 cm pieces, roll into an oval shape according to the size of the eyes on the face sample, and stab to harden.

24. Make the other eye in the same way.

25. Attach eyes on the face with a bond. Look at the face sample and balance it.

26. Cut two pieces of pink yarn into 3 cm pieces, roll into an oval shape according to the size of the cheeks on the face sample, and stab to harden.

27. Check the balance of the entire face, and paste (26) symmetrically.

28. Cut the brown thread into 1.5 cm pieces and divide into three. 

29. Pinch one of these strands between your fingers and turn and pull to form a string.

30. While checking the balance of the face, paste the strings, and cut the excess with scissors.


 That's it, you're done!

WHAT THE SOKAWAII FAMILY SAYS ABOUT US

This box is better for value than the other kawaii box subscriptions I've tried and the stuff is cuter.  

Super KAWAII!!

This subscription box is definitely worth getting multiple at a time (...) So instead of being sad I missed out on a box I instead box a six month sub and will probably renew it again. The items are definitely worth it and are super KAWAII!  

I found out about them from my best friend. And she wasn’t lying when she said they were amazing. All of the items are so cute and they care for their customers and keep them updated. They are just great. :)  

Join the SoKawaii family!

Follow us on instagram @sokawaii and share the love of kawaii with #sokawaiibox